Green Lumber Green Lumber Products Whether you're sawing or chipping green lumber, Simonds has you covered with the best cutting tools available. Wide bands, narrow bands, circular saws of various types, knives, accessories and filing room equipment are all examples of Simonds' long-term commitment to the green lumber processing industry. Choose Simonds and make short work of long cuts!

Logs Logs Products When it comes to processing logs, Simonds International has you covered. Primary breakdown is our specialty. We have large diameter cut off saws to cut logs to length either in the bush or at the mill. Once in the mill, we have a full range of headrig bandsaws for lumber production, from 1" wide to 16" wide. Right here in Michigan USA, we manufacture all manner of chipping knives for Pulp and OSB, veneer lathe knives for plywood and sawmill primary breakdown knives. We also have the all the circle saws you will need to process your logs, including Insert Tooth headrig saws and carbide tipped small diameter saws. Since 1832, Simonds has been a lumberman's best friend.

Pallets Pallets Products Whether manufacturing new pallets (from lumber produced at on-site lumber mills or from purchased cants) or recycling used pallets, Simonds offers industry-leading saw blades to help power your operation. From RedStreak to PalletBuster and other related blade products, Simonds makes the cut!

Woodchips Woodchips Products No matter what kind of chips you're making, Simonds knife products and accessories will make the work go easier. After all, we�ve been innovating knives for chipping wood for a long, long time! When the chips are down, depend on Simonds.

OSB & Plywood OSB & Plywood Products From making OSB and plywood to finish-working them, look to Simonds for all your cutting needs. Simonds knives and bandsaw blades help turn raw wood into finished boards, and Simonds bandsaw blades and circular saw blades cut them back down to size.

Millworks/ Cabinets Millwork/ Cabinets Products Mill works and cabinet shops depend on their cutting tools to provide accurate, clean, smooth cuts. For the best saws and knives available, choose Simonds. Our long experience working wood, laminates and veneers allow us to give you the best possible working edge for your cutting tools.

Non-Metallic Materials Non-Metallic Materials Products When working with non-metallic materials, you need cutting tools that are going to last and aren't going to ruin the work. Simonds has the experience and the products you need. Whether you use files, bandsaw blades or power tool accessory blades, Simonds products are job-proven to give you the best cuts and cleanest finish.

Non-Ferrous Metals Non-Ferrous Metals Products Non-Ferrous Metals - whenever you're cutting aluminum or other non-ferrous metals, think of Simonds. Whether standard cutting or high-speed cutting such as friction sawing or foundry sawing, Simonds blades make the cut! We have the non-ferrous circular saw blades to power tool accessory blades to bandsaw blades made of carbon, bimetal or carbide tipped that you need. And when you're done with the cut, clean up the workpiece with a Simonds Red Tang file.

Structural Steel Structural Steel Products From a single piece of rebar to a major bridge structural section, one piece at a time or in bundles, Simonds offers bandsaw blades engineered specifically for your application. And we can help before and after the cut, as well, from magnets to move and hold materials in place, to files for cleaning up any burrs you might get. It's Simonds for sure!

Low Alloy Metals Low Alloy Metals Products Low Alloy Metals - imonds has the saw blades you need to make short work out of low alloy metal-cutting. Simonds blades are user-engineered, to give you the performance you need. And we've got you covered before and after the cut, with magnets for moving your material to files for cleaning up any burrs you might encounter.

Alloy Steels Alloy Steels Products Alloy Steels - If you work with stainless steels and other nickel alloyed steels, think Simonds to get the job done right. Our bimetal and carbide tipped bandsaw blades feature the latest in saw blade design to ensure the cut you get is as accurate and fast as it can be, time after time. And our hole cutters make true circles time after time. Simonds blades and cutters - like hot knives through butter.

High Alloy Metals High Alloy Metals Products When you've got to work the toughest metals known to man, look to an industry legend for help - look to Simonds. We've been making leading edge metal-cutting saw blades since the early 1900's, and our current generation of bandsaw blades is leading the way into the 2000's. If your material is tough, think Simonds, because we're tougher!